Remotely Connect with Autel Device

 Here you are:
Sometimes technician will require to remotely control  Autel Scan Tool device for diagnoses without being on-site. We can use Teamview to connect with tablet to do that. Here are taking the Autel MaxiIM IM608 as a demonstration.

Note: Please make sure the Autel scanner is connected with WIFI before operation.

On Autel Device Side

1. Start Teamview program - “Remote Desk”.
2. Stay in the page, tell the other side “Your ID”.
3. Press “Allow” to allow remote support, your device will be remotely logged in from the other side.

On PC End Side

1. Go to https://start.teamviewer.com
2. Input the ID number from Autel device side, press “Connect”.
3. When you logged in device that means connection successful.

Done!

Now you can remotely control the Autel Diagnostic Tool from PC side.
This procedure applies to most Autel scan tools like Autel MaxiCOM MK906BT, Autel MaxiCOM MK908, Autel MaxiPRO MP808...etc.

 Source:http://blog.auteldiag.com/remotely-connect-with-autel-scan-tool-for-diagnoses/

Solution to Autel MP808TS “Has been locked since illegal operation” Problem

 Look here: The Autel device such as Autel MP808TS popped up this message "The device has been locked since an illegal operation has been detected.” it means the device lock is because someone had replied to Autel that this MP808TS scanner was stolen. It is on the blacklist now so that no one can use it anymore.

👇How to avoid being locked?

1. If your Autel scan tool device has been locked maliciously, please provide series number to the agent where you bought from. Autel factory will help to unlock it;



2. Buy from Auteldiag.com, where provides genuine 100% original guarantee & perfect after-sale service for all Autel products. This problem is not going to happen.



3. Do not buy from second-hand of unknown origin.



Note: For privacy protection, if any of your Autel tools was lost, please contact your agent to lock device in time.



More questions about Autel Diagnostic Tools, welcome to contact us.

E-mail: Sales@AutelDiag.com

Skype: Auteldiag.com

WhatsApp: +86-13372689373

 Sharing a trust web:http://autelim608.co.uk/

 

How to Check IMMO Supported Car List in Autel IM508/IM608?

 

Not sure whether the key programming function or IMMO part replacement function is supported for a specific vehicle or not? Here is a way that can help to check in Autel MaxiIM IM508 & IM608 scan tool directly. Certainly, you can also find it in most Autel Diagnostic Tools.

 

Step1. Go to “Function Viewer”;

 

Step2. To get symbol annotation, press question button on the top right corner;

 

Step3. Select appropriate Autel scanner model & car maker/model/year to search results in the form;

 

Now you can check the IMMO function supported car list.

Thanks to https://www.auteldiag.com/

 

How to upload Autel IM508/ IM608 Datalog from History?

 

Sometimes Autel MaxiIM IM508 or Autel MaxiIM IM608 will meet operation failure and disconnect with the vehicle, at this time you’ll require to send datalog from history for Autel technical help.

 

It may help:

How to catch the system logs?

Upload system logs: solve Autel scanner WIFI& locked car issue

How to send datalog from history?

Step1. Press “Data Manager” on Autel IM508/IM608 screen;

Step2. Press “Data Logging”;

 

Step3-4. Press “History” function on top bar;

Step5. Press the arrow right on the corresponding failure function page;

 

Step6. Input the reason for sending datalog;

Step7. Press button to send log.

 

How to extract the datalog from IM508/IM608 with PC manually?

In case some customers may not upload the datalog from device directly, this way will help to get datalog from PC for analysis.

 

1. Connect IM508/IM608 to the PC;
2. Get datalog manually from device, which you can find at “PC\MaxiIM IM608\Internal storage\Scan\datalogging”.

 

More questions please contact us.

https://www.auteldiag.com/

 

How to Update Autel VCI FIRMWARE

 

Step-by-step here: How to upgrade Autel MaxiVCI Mini VCI Firmware for Autel scan tools (MK808BT,MK808TS,MX808TX,MP808TS,TS608)

Note:
This procedure cuts across different makes of Autel scanners and applies to the MaxiVCI mini, MaxiVCI 100, and the wireless diagnostic interface (for the MK908 for example). It is essential in addition to routine Autel scanner updates, to have the vehicle connector interface aka wireless Bluetooth VCI, updated to the latest firmware to ensure optimal connectivity to vehicles. The MaxiVCI mini is used by tools like MaxiCHECK MX808TS, MaxiCOM MK808TS and MK808BT. Examples of Autel scanners that use the MaxiVCI 100 include the MaxiSYS MS906BT, MaxiSYS MS906TS etc. The MaxiCOM MK908 uses the wireless diagnostic interface aka Bluetooth diagnostic interface.


Important:

• 1.Ensure the device is well charged
• 2.Connectuion to VCI is firm
• 3.internet connection is stable

Procedure:
Step 1. Connect the VCI to the table via supplied USB


Into the USB port, these two green lights come on which means it works


USB connect indicators on the various models

Step 2. Connect the tablet to the internet via WIFI, then tab VCI Manager >> Update


During the update process:

• Do not leave this page during upgrade
• Do not disconnect the VCI

Current version is V2.03, reboot your VCI to completed update


Step3. Disconnect and then reconnect the USB to reboot the VCI


Update completed!

Source:http://blog.auteldiag.com/how-to-update-autel-vci-firmware/

Autel MaxiPRO MP808TS to add new key for Toyota Corolla Matrix 2008

 Car model and year: Toyota Corolla Matrix 2008
Purpose: Adds a Blade Key via OBD
The tool used:  Autel MaxiPRO MP808TS
Procedure:

Here are 2 keys: a master key & a new key.

 

Connect Autel MP808TS with OBD, press

Service >> Immo keys >> Toyota >> Automatic selection >> Read >> OK >> Yes

 

 

Hot functions >> Auto remote match >> Key registration

 

Use this function to register a new transponder code, press “OK”.

 

This function serves to register immobilizer keys, press “Next”.

 

Step1

Perform the operation below:

1. Remove the key from the key cylinder.
2. Insert the key back into the key cylinder.
3. Turn the ignition on.

Press “Next”.

 

Step2

Remove the master key from the key cylinder within 20s, press “Next”.

 

Step3

Insert the new key to be programmed within 10s, press “Next”.

Attention: do NOT turn the ignition on.

 

Wait for registering...

  

 

Key registration is completed.

This key should start the vehicle now.

Press “ESC” to finish.

 

Let’s try the new key now, it can start the engine.

Key programming has done!

 

 

This is using Autel MP808TS diagnostic tool to add a new key for Toyota Corolla 2004-2008 successfully. Very simple to complete in 4 minutes.

 Copyright Auteldiag.com