Autel Diagnosis scanner: AUTEL MaxiDiag MD808 Pro OBD2 Diagnosis ,level up!

MaxiDiag MD808 Pro is built to take your diagnostic experience to a whole new level. Loaded with oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration functions, MD808 Pro can access ALL available modules for the best diagnosis operations. With all that enclosed in a 4-inch hand-held device, there is no better multifunctional scan tool on the market.

Top 14 Reason to Choose AUTEL MaxiDiag MD808 Pro:

1. Read/Clear Codes and Live Data for ALL systems, all avalable modules within Powertrain, Body, Chassis, information and communication systems.
2. Read and clear trouble codes, control and Support BMS/Oil Reset/ SRS/EPB/DPF service functions
3. Support oil service reset
4. Support battery registration and reset
5. Support diesel particulate service including forced regeneration
6. Support steering angle sensor (SAS) reset
7. Relearn parking brake pad after replacement
8. Reset service mileage and service intervals
9. Turn off ECU brake warning light
10. Perform O2 monitor, on-board monitor, I/M readiness and component testing
11. Print diagnostic reports via PC connection
12. Global OBD II coverage for U.S. domestic, Asian and European makes and models
13. All OBD II protocols, all 10 test modes and enhanced OBD II mode 6 support
14. Update: Lifetime FREE software update

AUTEL MaxiDiag MD808 Pro Vehicle coverage:

Abarth, Alfa Romeo, Audi, VW, For Seat, Skoda, Volvo, Saab, Bentley, Mercedes Benz, BMW, Bugatti, Citroen, Renault Peugeot, Dacia, Fiat, Ford, Jaguar, Lancia, Landrover, aybach, Mini, Opel, Porsche, Smart, Vauxhall
Acura, Daewoo, Honda, Hyundai, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan Group, Scion, Subaru, Suzuki,For Toyota
Chrysler, Ford, G-M

AUTEL MaxiDiag MD808 Pro Specifications

Processor ARM® Thumb® Processor (400 MHz)
Memory 32MB, 166 MHz
Display 4.0 inch LCD with 800x480 resolution
Connectivity Mini USB: 2.0 Micro SD Card (16GB)
Power Consumption 1.7 W
Operating Temperature -10°C to 60°C (14°F to 140°F)
Storage Temperature -20°C to 70°C (-4°F to 158°F)
Operating Humidity 5% - 95% non-condensing
Housing Strong plastic housing with protective rubber boot
Dimensions (W x H x D) 202 mm x 92 mm x 35 mm (8.35" x 3.62" x 1.4")
Weight 313 g (0.69 lb.)

autel-maxidiag-md808-pro-display-1