Autel MaxiIM IM608 Add Key To GM Chevrolet Cruze 2013 By OBD2

How to use Autel IM608 to add a new key for Chevrolet Cruze 2013:

1. Read vehicle IMMO data

Plug IM608 into the OBD2 port of the car

->IMMO->GM->Automatic selection

Enter the VIN number or press “Read” to obtain the VIN.

 

Confirm vehicle profile ,then press “OK”

Choose the key type” Blade Key”->”1.4T”

 

 

2.Password reading to get PINCODE

Hot function->Read immobilizer password->Read immobilizer password(CAN)->Password Reading

 

 

Note:
1.This feature recommends using USB to connection VCI,otherwise the feature may fail
2.this feature need a network connection in parts of vehicle ,pls ensure the network connection is
normal

Switch the ignition on, press “OK”  to continue
System data initializing
please wait..
establishing vehicle communication…

 

 

Reading PIN, wait pls …

Pincode  read successfully!

3. Add key

->Control unit->Immobilizer(CAN)->Add Key

Then please close all doors and switch the ignition on.

Please input 4-Digit Pin Code, press “OK” to continue

 

 

Pls switch the iginition off and remove the key, press OK

 

​​​​​​​

4.Test Remote locking /unlocking key function.

Done! Autel IM608 is successfully tested working fine with Chevrolet Cruze 2013 key programming

 Source:https://www.obdexpress.co.uk/service/autel-im608-add-keys-to-chevrolet-cruze.html

How to use Autel IM608 added Key to Mercedes Sprinter Van 2006-

How to add a new IR key on Mercedes Sprinter 2006- with Autel IM608 and XP400. You can use it on older sprinters and newer sprinter, so it's not just dedicated to this one.

- Mercedes key programmer for this procedure:
Autel MaxiIM608, key programmer XP400, Existing ignition key, new key.
 

- Proper setup and connection.
Wrong connection vs right connection


-How to add a key with the IM608 and XP400.

1. Click on "Immo".
 


2. Identify vehicle model.
Accept.
 

Search Sprinter.
 

Smart mode.
 

Model year: 2006-
 

Click on "Add key".
 

Read EIS data.







Number of possible existing keys.







3. Password calculation.









4. Add new key.







5. Test Remote locking /unlocking key function.

Thanks to Autel MaxiIM608 and XP400.

Source:
http://www.obdexpress.co.uk/service/autel-im608-add-keys-to-sprinter-van-2006.html