Autel MaxiIM IM508 Key Programmer Reviews in 2020

Autel MaxiIM IM508 Key Programmer can add new keys, programming key when all keys lost, can read pin code, add remote worked, etc.
 

Here are the real reviews from Credit to FB Group Autel MaxiIM IM608 & IM508 OBDII Success Members. (Big thanks!!!)


Fiesta 2018 add Smart key 

Took car under menu 2018-

Read flash, dash off for about 2mins (don't panic), then Reading.

Added used key Hitag pro Id49.

Used tool im508 with connected to WiFi and xp400.

But learning new key was in the middle console. XP400 not needed.

 

Peugeot 207

read pin successful

Coded car successful (in 2 seconds)

Remote didn't work





Peugeot 207 2007

Pin Read success

Add key success.

Used aftermarket remote CE0536 ASK.





W211 2005

Autel Im508 +xp400

Xhorse BE key programming via IR.

Only obd job - You need to follow instructions.

Whole process took about 30min - it was my 1st MB. Calculation about 18mins. Without gbox.

Warning - after programming new key original key stopped working. Remote worked, but cannot turn on ignition. I needed to left it in ignition and wait few minute, then I heard ESL motor and car started.

 



Toyota Yaris HV - Add Key - 5 min done with IM508







Ford Transit 2020 virtually new 300 miles

Add a remote key id47/49

Internet connection needed

Battery support pack

Tried to add key with new un programmed key, failed security each time.

Tried using working key, IM100 (same as IM508) then read the flash, took about 3 minutes, then ignition off, insert new key to add, programmed perfectly.



MB W246 2013 add key success. IM508+xp400.





Opel mokka 2016

Pin Read

Add key - not ok, car didn't accepted new key.

I made AKL procedure and both Keys were learned.

Safety time ca. 10min, Then procedure open and close driver door and turn off turn on ignition.

Key tool max and kdx2 clone this id46 ok but car doesn't start. That's Why I used im508 to program this key.





Megane 2013

Read D Flash by obd. Im508 without programmer.

Program blank card pcf7941

4minutes work.

I programmed blank card without using existing card, So it can do AKL too.

Internet connection required.





Q5 2012 BCM2 315mhz

Im508 + xp400.

Make dealer key and add key by obd.

First attempt failed - I didn't connect autel to internet and autel asked me about de-energize bcm2. I didn't unplug bcm2 during programming and it was dead after trying Read eeprom data. I had to Read bcm2 on bench and repair dflash file.

Second attempt after fixing bcm2 success without any problem.

Autel connected to internet, I need to remember that





Audi A6 2007. OBD success.

Read immo data,get pin and CS. Made dealer key and and add key.

Used autel IM508 and XP400-PRO. Internet connection needed. Aftermarket key used, remote work instantly.

 



MB SL 2003 key added, im508 + xp400, OBD.





2017 Tiguan R line...add mqb remote key im508 with xp200winner..and so easy!





IM508 Range Rover Sport 2006, add 2 keys in 5min





Im508 2013 Smartfor2 add key success





2015 VW GOLF AKL SUCCESS , IM508 + XP400 , AROUND 15 MINS FOR ONLINE CALCULATION ($30) AFTERMARKET REMOTE USED .





Megane III RS 2011

Pcf7952 Add key

Im508 few minutes, job done via OBD.

 

Peugeot 308 2018 key added. IM508





2010 Mercedes sprinter

Add 2nd

Less than 5mins .for password calculation

Using im508 and xp400

Used aftermarket key



Mercedes W210 AKL success 20 min. password - IM508 & Gbox2 & HP-400 pro




Fiat Grand Punto 2007 , Read immo data , make dealer key and programme key ... all ok . Im508 + xp200.





Success add key by OBD Mercedes C Class 2001 W203 with IM508 + XP400 pro + key simulator. Password 4 min. Aftermarket key.



Autel IM508 2017 TOYOTA PROACE

READ PIN SUCCESS

ADD KEY SUCCESS

Used an xhorse remote , went in under Peugeot expert.





tool: im508 + xp400

all via obd

upgraded cas3

made dealer key

learned key

used power supply 14V 50A

used personal cellphone as hotspot 4g

success!



VW Transporter 2010, AKL, OBD, im508 and XP400. Paid $10 to Autel.





MB SPRINTER 2008 key added. Password in 15 min. OBD + IM508 + XP400



Autel Im508

Vauxhall astra 2008 vxr

Read pin yes

Programed keyless start key yes

Added second key

But will delete all key then you re add

God job money in the bank





Land Rover Freelander2 , 2011, success

Autel Im508





Ford Ranger 2017 key added. IM508, OBD





Dacia duster 2011 4x4

add key immo chip PCF7946AT

IM508 OBD





MB VITO 2014 key added. Password in 28 min. OBD + IM508 + XP400.




CITROEN C3 EU 2016

IM508 OBD

PIN+ADD KEY



Mitsubishi Outlander PHEV 2014 add key success! Im508



Im508 on 2010 mini

Add 2nd key CAS 3





Vauxhall Insignia 2014, key added, im508, OBD, need to wait 12min.



Autel Im508 2018 Vauxhall/Opel Vivaro add key success , went under Renault Trafic took around 25 minutes.



Updating...



Good source of Autel Im508 key programmer:

https://www.obdii365.com/wholesale/autel-maxiim-im508-diagnostic-and-key-programming-tool.html

Top 3 2004 Mercedes SL500 OBD2 Scanner Test Report

Topic : Foxwell nt510 elite , MB SD C4  or Autel MS906BT diagnostic tool ,which is the best for 2004 Mercedes SL500?

 

Car model and year: 2004 Mercedes SL500

 

Symptom: in a light front end collision, which I took on as a project for the significant other. One issue that I cannot seem to get a clear answer to is this Tele aid message at start up.

 

SL500 OBD2 Scanner recommendations and test report:

 

1. foxwell NT510 Elite (Same as NT530, Not NT510)

As an alternative to Star Diagnosis, the $135 N510 Elite is the best value available. It will do everything you would likely use a full-blown Star Diagnosis to do; what it can not do you likely would never have use for anyway. (Someone here may tell you that it won’t handle “SCNs” — and they’d be correct — but what they don’t know is your car has no use for SCNs (Software Calibration Numbers).

 

2. Star Diagnosis

At least one member here is using a Foxwell NT510 Elite at $135 there is no better value to be had. Still, I would prefer to spend $250 and have Star Diagnosis. I’d much rather look at a 14″ PC screen than a small LCD, and Star Diagnosis has some unique capabilities which on occasion can be helpful.

 

Tele Aid is obsolete and no longer supported by M-B. A simple change in the coding for the instrument cluster can essentially eliminate it from the vehicle. That is one of the “unique” features of Star Diagnosis which I referred to.

 

This looks pretty good to me:  sdc4 plus + Lenovo X220 I5 4GB Laptop

I would purchase the multiplexer and cables along with a hard drive containing the Star Diagnosis software and other useful programs (HHT-WIN, Vediamo,DTS Monaco). This contains a hard drive of 4GB memory.

The hard drive should practically be plug-and-play with the Lenovo X220 I5.

 

Please try this at your own risk: if the Star Diagnosis software turns out to be less than satisfactory, you can download a free copy of Star Diagnosis from my One Drive account. This free copy is very slightly superior to all others in that it runs faster and has been found to have more features.

 

For the sake of security, if you have any questions, please contact the dealer directly.

 

Good to know:

C6 does not cover old cars, many fake clones too

C5 originally and good clones has Xentry on a hardrive in the multiplexor but unfortunatly software support stopped last year, I have worked on the Xentry version called KIT2 for this one 2 weeks ago
many fake C5’s clones also that just have the C5 case with a C4 inside

C4 is the only one covering from very old to latest cars and can add optional DOIP, supports all Xentry versions, online, and all tools like Vediamo and DTS monaco.
just the best if you make sure about some components that should be onboard
It must have these Professional Military Grade Chip onboard: AM79C874VI & ADG426B Chip. it was just a matter of asking, but no “save-a-buck-guy” ever asked directly.
This is also proof that it is latest revision. There are NONE on sale shipped from the US, I never found one on ebay ether.

 

C3 is for old only no online coding, no Doip and no Xentry older than 2015, almost 100% clones available on ebay and outside china are bad cheap clones. they are first gen clones

 

3. Autel MS906BT

I just ordered the Autel MS906BT.

MS908 is the best option for multiple cars
but it’s not cheap
the online versions also provide coding but on MB you might have some small issues with online on headlights for example.

 

The finest release for C3 is 2014 and not 2008 (that version is just a myth).
People are free to get what they want from vintage to 50$ other brand scanners.
You may even chose a 1100-2900 $ multi-brand Autel if you have multiple cars
All these have their limits from years to functions. Complete & Perfection is not in those.

 

Update:

Well i got the autel sooner than expected. Looks like its able to do most of what I am after so far. Here now is the pesky code that is triggering the srs light. N1262 is the one that remains.

  

 

it is a multi car scanner. Might get stuck on some things like updating, SCN, and erasing airbag, but that depends of what Mercedes model you work on.
Most of the workshops use these in addition to real Xentry as they don’t have Mercedes Online. They can’t get stuck
The Autel appears to have the same limitation that iCarsoft and Foxwell have: they report the diagnostic codes but will not explain how to resolve them. This is where the Star Diagnosis software can be an enhancement, since it allows you to look-up every diagnostic code and read the procedures to fix.

 

Update:

So a little update for anyone interested. I got past the 9002 fault code by adding a fuse that apparently was missing at the driver side engine bay. However, I still have a SRS light. The one code that keeps coming up is the N1262. Maybe I hit the limitations with this Autel scanner.

 

However I did actually end up fixing the srs light today. The autel was showing me when a specific code that was triggered by means of the hour meter. Which was only 30 minutes earlier. The code was pointing at the passenger child occupied sensor, so I moved the seat and made sure everything was plugged in…then disabled and reactivated it through the autel. Then no more srs light.

Was then able to plug into a Ford and a jag for some diagnostics…so the autel is really proving to be a good investment for me at this point.

 

Enjoy!

 http://blog.obdii365.com/2020/10/20/top-3-2004-mercedes-sl500-obd2-scanner-reviews/

How to use Autel XP400 PRO

 

Hey guys, let’s start a new topic: How to use Autel XP400 PRO with Autel’s IMMO & Key programming tablet (Autel IM508, IM608, IM608 Pro etc), with Autel XP400 PRO connected, Autel tablet will have powerful functions including. advanced key programming vehicle coverage, powerful IMMO Functions, advanced Programming function, Read EEPROM and MCU, Read/Write odometer, and more.

 

Autel XP400 PRO Quick Reference Guide:

1. USB Port – provides data communication and 5V DC power supply.

 

2. DC Port – provides 12V DC power supply.

 

3. DB 26-Pin Port — connects with the Mercedes Benz infrared collector, ECU cable, MCU cable and MC9S12 cable.

 

4. Cross Signal Pins – hold the MCU spare cable or DIY signal interface.

 

5. Vehicle Key Slot – holds the vehicle key.

 

6. Transponder Slot – holds the transponder.

 

7. Mercedes Infrared Key Slot – holds the Mercedes infrared key.

 

8. Status LED – indicates the current operating status.

 

9. EEPROM Component Transponder Slot – holds the EEPROM plug-in transponder or EEPROM socket.

 

USB Port

The Type B USB port provides data communication and power supply for handheld device, PC and XP400 Pro.

 

DC Port

DC Port is used to provide 12 V power supply for the XP400 Pro.

 

DB 26-Pin Port

Four components can be connected to this port: Mercedes Infrared Collector, ECU Cable, MCU Cable and
MC9S12 Cable.

 

 

 

 

Important:

Before operating or maintaining this unit, please read these instructions carefully. Pay extra attention to the safety warning and precautions. Use this unit correctly and properly. Failure to do so may cause damage and/or personal injury and will void the production warranty.

 

1. Insert the USB port into XP400 Pro. Ensure the proper connection.

 

2. Connect the other port of the USB cable with Autel’s IMMO & Key programming tablet (for example: Autel IM508, IM608, IM608 Pro etc) or PC which has installed the PC programmer. Ensure the proper communication.

 

3. Activate Autel’s IMMO & Key Programming Tablet or the software from PC. Make sure the display tablet has sufficient battery or the software from the PC has been updated to the latest version.

 

4. Connect Autel’s IMMO & Key Programming Tablet (the software from PC) with XP400 Pro by USB cable.

 

* After the connection of IMMO & Key Programming Tablet with XP400 Pro, the LED

indicator from XP400 Pro will display green light, indicating the readiness of XP400 Pro.

 

Autel XP400 PRO Package list

1pc x XP400 Pro Main Unite

1pc x APB129 – EEPROM Adapter

1pc x APA002 – EEPROM Socket

1pc x APB125 – Mercedes Infrared Collector

1pc x APB103 – MCU_PLCC52 Adapter

1pc x APB104 – MCU_FQFP64 Adapter

1pc x APB105 – MCU_FQFP80 Adapter

1pc x APB106 – MCU_FQFP112 Adapter

1pc x APB107 – MCU_FQFP144 Adapter

1pc x APB108 – MCU_FQFP176 Adapter

1pc x APB109 – MCU_FQFP32 Adapter

1pc x APB110 – MCU_FQFP48 Adapter

1pc x APB111 – MCU_SO28 Adapter

1pc x APA101 – Spare Signal Cable

1pc x APC101 – USB Cable (Standard USB –Type B USB)

1pc x APA103 – EEPROM Clamp

1pc x APA107 – ECU Cable

1pc x APA108 – MCU Cable

1pc x APA109 – MC9S12 Cable

1pc x Dupont Line

 

Why Autel XP400 PRO is powerful than Autel XP400? please look at their comparison:

Autel XP400 PRO vs. Autel XP400
 

Features	X400 Pro	XP400
Image
Read/write EEPROM	445 different chip types newly added support (AM29FXXX series, MB29FXXX series)	330 chip types
Read/ write MCU	2067 chip types	1541 chip types
Read/write Engine ECU	41 chip types add write support for SIMTEC76(AM29F800BB).WRITE	40 chip types
read/ write Immoblizer ECU	181 chip types	168 chip types
Read/write odometer	read odometer module 171 types (update in July)	read odometer module 9 types
Airbag read/ write	read airbag module 5 types	read airbag module 5 types
Frequency detection	315/ 433/ 868MHz	315/ 433/ 868MHz
read/ write Key	Support	Support
Unlock key	support 11 key types (Audi/ BMW)	N/A
Write key via dump	Mitsubishi, Suzuki, fiat, landrover, Jaguar	Mitsubishi, Suzuki, fiat landrover. Jaguar
Easy to use/ stability	I.Stability of key read/ write, chip read/ write, IR key read/ write are greately enchanced. 2. menus are too vague and can’t select intuitively 3. with high-definiton wiring diagrams (not sufficiently covered)	1. menus are too value and can’t select intuitively 2. with high-definiton wiring diagrams (not sufficiently covered)

 

 

The above information is not detailed enough? Please read detailes here:

https://www.obdii365.com/wholesale/autel-xp400-pro-key-and-chip-programmer.html

BTW, If you are interested in im608 pro, contact us  to get the best price

Whatsapp/BOTIM: +86 18259252285
Email: Sales@OBDII365.com
Skype: OBDII365.com