Autel MaxiSys MS906/MS906BT/MK906BT Battery Replacement Tutorial

 

This is a tutorial about how to change battery for Autel MaxiSys MS906/ MK906BT/ MS906BT/ MS906TS scan tool step by step.

 

For Autel MS906TS, MS906BT, MK906BT Tablet

• Make sure that the new battery is good and its specification is 10000mAh 3.7V;

 

• Refer to images below to stick foam on the battery, making sure that the foam is straight sticked;

 

 

• Put the battery inside the battery cover;

 

 

• Assemble the battery block and the bottom shell and then tighten all the screws.

 

 

For Autel MS906 Tablet

• Make sure that the new battery is good and its specification is 5000mAh 3.7V;

 

• If the battery foam also needs to be changed, please use 2pcs foam and place them inside the bottom shell with the sticky sides upward;

 

• Put the battery inside the battery cover;

 

• Assemble the battery block and the bottom shell and then tighten all the screws. (refer to Autel MS906BT/MK906BT step4)

 

Hope it helps.

Any questions welcome to contact us.

 Source:

https://www.auteldiag.com/service/autel-ms906-ms906bt-mk906bt-battery-replacement.html