Autel MaxiCOM MK808: How to reset a forgotten password?

 If your Autel MaxiCOM MK808 is locked because you forgot the password. Just renew the machine by following this post.

Image: Autel MaxiCOM MK808 is locked. The scan tool has a passcode on it I cannot get into the scan tool.

Solution:

Renew the machine. The following is the operation guide and Decrypt file. 

https://mega.nz/#!YB4k2SQS!Xnc_QtOWvg-xQjhH0OkyTRZMtahP0_hSafrK0nnfB_w     

This link includes these content:

I take out the “operation instruction.docs” below.

Topic: MK Format Device Compulsively

1. Set up Computer Circumstances
2. Install RK driver

Open the folder “RK_DriverAssitant”, run Driverintall.exe, following the on-screen prompts to install the driver.

2. Install Google-USB driver

Some computers may need to install this driver.

Open the folder “Google-USB_driver”; If your computer OS is 32-bit, run DPInst32.exe and if your computer OS is 64-bit, run DPInst64.exe.

If you have already installed this driver before, please go directly to next step.

1. I Reflash the Device

!!Attention：This procedure will format your device compulsively and delete all data on your device.

3. Run Reflasing Tool

Open the folder “AndroidTool_Release_v2.1”, run AndroidTool.exe, the reflashing window will be displayed as shown in the figure below.

4. Turn Your Device into Reflashing Mode

Connect your device to computer with USB cable and wait until the computer recognizes the device.

You can check the connection status via Device Manager on your computer.

As it is shown in the red mark on the figure below, the device was already recognized by the computer.

5. Ready to Reflash.

Double click on the script named “reboot to loader.bat”;

If it is run successfully, there will be a prompt message “Found One LOADER Device” displayed on the reboot window (as shown in the figure below).

After you saw this message, click “Run” button to start and wait till rooting process completed.

Thanks~~

https://www.auteldiag.com/