How To Reset ELV BMW Using Autel Diagnostic Machine. This was a 2007 bmw e90 320d diesel, luckily the car started for the customer. Usually when this steering lock and steering comes on it will stop the car from starting.
Purpose:To Reset ELV BMW Using Autel Diagnostic Machine
Car module 2007 BMW E90 320d
Tool option: Autel MaxiSys MS908S Pro
Procedure
Connect Autel MS908S Pro with BMW OBD2 port:
Go to “Service” after auto detect vehicle VIN >> Power train >> CAS
There are 3 reset functions: reset starter lock, car access system reset, reset internal electric steering lock frequency counter.
I will do them all in turn.
Reset Starter Lock
Reset starter lock >> Electronic immobilizer(EWS): reset starter lock
Turn on terminal 15(ignition), press “Continue” >> Continue.
So it was reset.
Car Access System Reset
Return back to press “Car access system reset” >> Car access system reset
Resetting car access system (CAS), press “Continue”.
Car access system(CAS) was reset, service function completed. Press “Continue”.
Reset Internal Electric Steering Lock Frequency Counter
Go back to press “Reset internal electric steering lock frequency counter” >> Reset the internal electric steering lock fault counter.
The internal ELV fault counter must be reset and a control unit reset performed after replacing the electric steering lock.
Note: this service function must be performed only after replacing the electric steering lock.
Press “F1” to continue.
Resetting internal ELV(Electronic Steering Lock) fault counter and performing control unit reset. Please wait!
The internal ELV(Electronic Steering Lock) fault counter was reset.
Upon the completion of the service function, read the fault code memory out of the control unit below and work through as required: car access system.
Press “Continue”.
Service function completed, press “Continue” to complete.
All finished! As you can see, the lights on dashboard were off.
This is using Autel MS908S Pro Diagnostic Scanner to perform ELV reset for a BMW 3 Series.
Source:http://blog.auteldiag.com/bmw-elv-reset-via-autel-ms908s-pro/
Car module 2007 BMW E90 320d
Tool option: Autel MaxiSys MS908S Pro
Procedure
Connect Autel MS908S Pro with BMW OBD2 port:
Go to “Service” after auto detect vehicle VIN >> Power train >> CAS
There are 3 reset functions: reset starter lock, car access system reset, reset internal electric steering lock frequency counter.
I will do them all in turn.
Reset Starter Lock
Reset starter lock >> Electronic immobilizer(EWS): reset starter lock
Turn on terminal 15(ignition), press “Continue” >> Continue.
So it was reset.
Car Access System Reset
Return back to press “Car access system reset” >> Car access system reset
Resetting car access system (CAS), press “Continue”.
Car access system(CAS) was reset, service function completed. Press “Continue”.
Reset Internal Electric Steering Lock Frequency Counter
Go back to press “Reset internal electric steering lock frequency counter” >> Reset the internal electric steering lock fault counter.
The internal ELV fault counter must be reset and a control unit reset performed after replacing the electric steering lock.
Note: this service function must be performed only after replacing the electric steering lock.
Press “F1” to continue.
Resetting internal ELV(Electronic Steering Lock) fault counter and performing control unit reset. Please wait!
The internal ELV(Electronic Steering Lock) fault counter was reset.
Upon the completion of the service function, read the fault code memory out of the control unit below and work through as required: car access system.
Press “Continue”.
Service function completed, press “Continue” to complete.
All finished! As you can see, the lights on dashboard were off.
This is using Autel MS908S Pro Diagnostic Scanner to perform ELV reset for a BMW 3 Series.
Source:http://blog.auteldiag.com/bmw-elv-reset-via-autel-ms908s-pro/
没有评论:
发表评论