Autel MaxiPRO MP808TS to add new key for Toyota Corolla Matrix 2008

 Car model and year: Toyota Corolla Matrix 2008
Purpose: Adds a Blade Key via OBD
The tool used:  Autel MaxiPRO MP808TS
Procedure:

Here are 2 keys: a master key & a new key.

 

Connect Autel MP808TS with OBD, press

Service >> Immo keys >> Toyota >> Automatic selection >> Read >> OK >> Yes

 

 

Hot functions >> Auto remote match >> Key registration

 

Use this function to register a new transponder code, press “OK”.

 

This function serves to register immobilizer keys, press “Next”.

 

Step1

Perform the operation below:

1. Remove the key from the key cylinder.
2. Insert the key back into the key cylinder.
3. Turn the ignition on.

Press “Next”.

 

Step2

Remove the master key from the key cylinder within 20s, press “Next”.

 

Step3

Insert the new key to be programmed within 10s, press “Next”.

Attention: do NOT turn the ignition on.

 

Wait for registering...

  

 

Key registration is completed.

This key should start the vehicle now.

Press “ESC” to finish.

 

Let’s try the new key now, it can start the engine.

Key programming has done!

 

 

This is using Autel MP808TS diagnostic tool to add a new key for Toyota Corolla 2004-2008 successfully. Very simple to complete in 4 minutes.

 Copyright Auteldiag.com